- Overview
- / TriTec S FORTIS COZI
- /with ceiling trim
TriTec S FORTIS COZI Spotlight
with ceiling trim
Installation depth 87.5mm
Including installation ring with expanding springs
Edge flange 8mm RAL9016
| P2200 29026.B |
|
P2200 29026.B / Datasheet | P2200 29026.B / LDT file | P2200 29026.B / LVK image | P2200 29026.B / Dimension drawing | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| P2200 29036.B |
|
P2200 29036.B / Datasheet | P2200 29036.B / LDT file | P2200 29036.B / LVK image | P2200 29036.B / Dimension drawing | ||||||
Spotlight
Round recessed spotlight with 25° pivotable light output thanks to a guide mechanism.
Heat sink made from die-cast aluminium, powder-coated black.
Warm dim LED (COB) for shifting the colour temperature by dimming from 2700 K (100%) to 1800 K (1%); high level of colour consistency (3 SDCM initial) and high colour rendering (CRI ≥ 95). PMMA collimator: light direction and LED contact protection. Darklight anti-dazzle cone made from plastic, with a high-gloss (vaporised) aluminium finish and a colourless scratch-resistant protective coating. DALI2 operating device with plug-in connection (installed without tools), secondary circuit.
Ceiling cut-out:
In combination with installation ring featuring expanding springs
P0000 00001.B
Cut-out: 68 mm
Installation space in suspended ceilings:
ETA version: 12 dm3
FORTIS version: 15 dm3
Installation type:
Incl. installation ring with expanding springs
Edge flange: 8 mm, RAL9016
COZI - Cosiness by shifting the colour temperature across the dimming range
TriTec S COZI follows the example of a thermal radiator, shifting the colour temperature across the entire dimming range – from 2700 K at full light output to 1800 K at 1% of the maximum luminous flux. This means a cooler light colour at a high luminous intensity and a cosily warm light colour at a low luminous intensity.
The best technology in the smallest form
An impressive design means TriTec S offers the perfect light solution for the most stringent requirements. A specifically developed die-cast aluminium heat sink ensures optimum LED cooling while keeping the installation depth to a minimum.
Darklight
A special coating ensures that the anti-dazzle cone does not scatter light itself and that the light only shines on the desired area in the room. This creates a 100% darklight effect.
Mounting ring with expanding rings and edge flange 8 mm RAL9016
Suitable for front part Z00 0030 or suspended ceilings Ceiling cut-out 68 mm Maximum ceiling thickness 15 mm
SHOW
Mounting ring with protective glass IP54, expanding rings and edge flange 8 mm RAL9016
Suitable for front part Z00 0030 or suspended ceilings Ceiling cut-out 68mm Maximum ceiling thickness 15mm Only approved for use inside
SHOW
Concrete installation housing HaloX 100 with tunnel 190
Kaiser HaloX 100 concrete installation housing with tunnel 190
SHOW
Front part to HaloX 100 cut-out 68mm
Suitable for installation housing Z00 0029 in combination with installation ring with edge flange 8mm
SHOW