- Overview
- / TriTec S FORTIS COZI
- /trimless
TriTec S FORTIS COZI Downlight
trimless
Installation depth 90mm
Order installation accessories separately
| P1100 29026.B |
|
P1100 29026.B / Datasheet | P1100 29026.B / LDT file | P1100 29026.B / LVK image | P1100 29026.B / Dimension drawing | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| P1100 29036.B |
|
P1100 29036.B / Datasheet | P1100 29036.B / LDT file | P1100 29036.B / LVK image | P1100 29036.B / Dimension drawing | ||||||
Downlight
Round recessed spotlight with fixed light output.
Heat sink made from die-cast aluminium, powder-coated black.
Warm dim LED (COB) for shifting the colour temperature by dimming from 2700 K (100%) to 1800 K (1%); high level of colour consistency (3 SDCM initial) and high colour rendering (CRI ≥ 95). PMMA collimator: light direction and LED contact protection. Darklight anti-dazzle cone made from plastic, with a high-gloss (vaporised) aluminium finish and a colourless scratch-resistant protective coating. DALI2 operating device with plug-in connection (installed without tools), secondary circuit.
Ceiling cut-out:
In combination with plaster ring, height-adjustable, without flange
P0000 00002.B
Cut-out: 75 mm
In combination with recessed installation ring for timber ceilings
P0000 00004.B
Cut-out: 65 mm
Installation space in suspended ceilings:
ETA version: 12 dm3
FORTIS version: 15 dm3
COZI - Cosiness by shifting the colour temperature across the dimming range
TriTec S COZI follows the example of a thermal radiator, shifting the colour temperature across the entire dimming range – from 2700 K at full light output to 1800 K at 1% of the maximum luminous flux. This means a cooler light colour at a high luminous intensity and a cosily warm light colour at a low luminous intensity.
The best technology in the smallest form
An impressive design means TriTec S offers the perfect light solution for the most stringent requirements. A specifically developed die-cast aluminium heat sink ensures optimum LED cooling while keeping the installation depth to a minimum.
Darklight
A special coating ensures that the anti-dazzle cone does not scatter light itself and that the light only shines on the desired area in the room. This creates a 100% darklight effect.
Mounting ring for timber ceilings
For installation in timber ceilings knurls for optimal adhesion without flange and headless screws for orientation when installing Ceiling cut-out 65 mm
SHOW
Plaster ring D62mm adjustable for mounting in suspended ceilings
For installation without flange in plaster ceilings Ceiling cut-out 75 mm Ceiling thickness incl. plaster 7-18mm
SHOW
Mounting ring with protective glass IP54, expanding rings and edge flange 8 mm RAL9016
Suitable for front part Z00 0030 or suspended ceilings Ceiling cut-out 68mm Maximum ceiling thickness 15mm Only approved for use inside
SHOW
Concrete installation housing HaloX 100 with tunnel 190
Kaiser HaloX 100 concrete installation housing with tunnel 190
SHOW
Plaster ring height-adjustable to front part 100
For installation in concrete installation housing without flange in combination with front part P0000 00006.B Plaster thickness 0-6 mm
SHOW
Plaster ring height-adjustable D62 for underside of ceiling
Ceilings underside mounting Plaster thickness 7-17mm for Downlight and Wallwaher Plaster thickness 7-10mm for orientable Spotlight
SHOW
Front part to HaloX 100 with cut-out for plaster ring
Suitable for installation housing Z00 0029 in combination with plaster ring height-adjustable P0000 00007.B
SHOW
Front part HaloX 100 for exposed concrete
Suitable for installation housing Z00 0029 for installation in exposed concrete without a flange
SHOW