- Overview
- / TriTec S ETA COZI
- /trimless
TriTec S ETA COZI Wallwasher
trimless
Installation depth 70mm
Order installation accessories separately
P4100 19006.B |
|
P4100 19006.B / Datasheet | P4100 19006.B / LDT file | P4100 19006.B / LVK image | P4100 19006.B / Dimension drawing |
---|
Wallwasher
Round recessed spotlight with asymmetrical light output for installation without flange.
Heat sink made from die-cast aluminium, powder-coated black.
Warm dim LED (COB) for shifting the colour temperature by dimming from 2700 K (100%) to 1800 K (1%); high level of colour consistency (3 SDCM initial) and high colour rendering (CRI ≥ 95). LED contact protection: diffusing film. Darklight anti-dazzle cone made from plastic, with a cover on one side, a high-gloss (vaporised) aluminium finish and a colourless scratch-resistant protective coating. DALI2 operating device with plug-in connection (installed without tools), secondary circuit.
Ceiling cut-out:
In combination with plaster ring, height-adjustable, without flange
P0000 00002.B
Cut-out: 75 mm
In combination with recessed installation ring for timber ceilings
P0000 00004.B
Cut-out: 65 mm
Installation space in suspended ceilings:
ETA version: 12 dm3
FORTIS version: 15 dm3
The best technology in the smallest form
An impressive design means TriTec S offers the perfect light solution for the most stringent requirements. A specifically developed die-cast aluminium heat sink ensures optimum LED cooling while keeping the installation depth to a minimum.
COZI - Cosiness by shifting the colour temperature across the dimming range
TriTec S COZI follows the example of a thermal radiator, shifting the colour temperature across the entire dimming range – from 2700 K at full light output to 1800 K at 1% of the maximum luminous flux. This means a cooler light colour at a high luminous intensity and a cosily warm light colour at a low luminous intensity.
Darklight
A special coating ensures that the anti-dazzle cone does not scatter light itself and that the light only shines on the desired area in the room. This creates a 100% darklight effect.
Light effect - Downlight
The three technologies – downlight, directional spotlight and wallwasher – favour a perception-driven approach to light concepts based on “light for seeing” and “light for looking” and in the most consistent design idiom possible.
Light effect - directional Spotlight
Light effect - Wallwasher
Mounting ring for timber ceilings
For installation in timber ceilings knurls for optimal adhesion without flange and headless screws for orientation when installing Ceiling cut-out 65 mm
SHOWPlaster ring D62mm adjustable for mounting in suspended ceilings
For installation without flange in plaster ceilings Ceiling cut-out 75 mm Ceiling thickness incl. plaster 7-18mm
SHOWMounting ring with protective glass IP54, expanding rings and edge flange 8 mm RAL9016
Suitable for front part Z00 0030 or suspended ceilings Ceiling cut-out 68mm Maximum ceiling thickness 15mm Only approved for use inside
SHOWConcrete installation housing HaloX 100 with tunnel 190
Kaiser HaloX 100 concrete installation housing with tunnel 190
SHOWPlaster ring height-adjustable to front part 100
For installation in concrete installation housing without flange in combination with front part P0000 00006.B Plaster thickness 0-6 mm
SHOWPlaster ring height-adjustable D62 for underside of ceiling
Ceilings underside mounting Plaster thickness 7-17mm for Downlight and Wallwaher Plaster thickness 7-10mm for orientable Spotlight
SHOWFront part to HaloX 100 with cut-out for plaster ring
Suitable for installation housing Z00 0029 in combination with plaster ring height-adjustable P0000 00007.B
SHOWFront part HaloX 100 for exposed concrete
Suitable for installation housing Z00 0029 for installation in exposed concrete without a flange
SHOW