Round luminaire body for ambient light regulation and presence detector for suspended installation, consisting of a luminaire frame, canopy, suspension cable, fabric shade and lens.
Luminaire frame made from sheet aluminium painted RAL 9016 white. Ring-shaped LED circuit board, direct beam, with protective blister. Indirect beam LED circuit board, with clear protective glass. Direct and indirect light can be controlled separately. The operating device, sensors and plug-in terminal for the luminaire cable are pre-assembled on the luminaire frame. Halogen-free internal wiring. Cable holder with hinges for three-point suspension, the steel cables can be levelled without tools. Transparent luminaire cable, 5 x 0.75 mm2.
Suspension cable: 3 x steel cable. 1 mm in diameter. Maximum suspension 2,000 mm (the lower edge of the ceiling to the upper edge of the luminaire shade).
Canopy: aluminium, powder-coated with textured paint, in RAL 9016 white, with a mounting plate to hold the steel cables in place. The cover is fixed using the white strain relief.
Fabric shade made from a white painted wire frame with a semi-translucent PVC film and a flame-retardant fabric cover (100% polyester). Installed without tools using a magnet fastening on the frame. The lens is held in place in the recess on the underside of the shade.
Microprismatic lens with a central sensor (passive infrared and light measurement), including cable and plug-in connector. The brightness setting can be programmed using a button or a separate remote control, which is available as an option.
