- Overview
- / TriTec FORTIS
- /Round with ceiling trim
TriTec FORTIS Lens wallwasher
Round with ceiling trim
For sawn or cut ceiling openings, recessed ring, white, RAL 9016, for installation in ceilings of 1–28 mm in slab thickness. Primary lens made of optical raw glass for focusing of light on the secondary lens. Secondary diverging lense for light guidance trough refraction and total reflection made of optical raw glass.
P3200 42006.D |
|
P3200 42006.D / Datasheet | P3200 42006.D / LDT file | P3200 42006.D / LVK image | P3200 42006.D / Dimension drawing |
---|
P3200 42001.D |
|
P3200 42001.D / Datasheet | P3200 42001.D / LDT file | P3200 42001.D / LVK image | P3200 42001.D / Dimension drawing |
---|
P3200 43006.D |
|
P3200 43006.D / Datasheet | P3200 43006.D / LDT file | P3200 43006.D / LVK image | P3200 43006.D / Dimension drawing |
---|
P3200 43001.D |
|
P3200 43001.D / Datasheet | P3200 43001.D / LDT file | P3200 43001.D / LVK image | P3200 43001.D / Dimension drawing |
---|
P3200 44006.D |
|
P3200 44006.D / Datasheet | P3200 44006.D / LDT file | P3200 44006.D / LVK image | P3200 44006.D / Dimension drawing |
---|
P3200 44001.D |
|
P3200 44001.D / Datasheet | P3200 44001.D / LDT file | P3200 44001.D / LVK image | P3200 44001.D / Dimension drawing |
---|
Lens wallwasher
LED (COB) light engine with touch protection and premium-quality colour rendering. Cooling via a die-cast aluminium heat sink that is powder-coated in black textured paint. Case with primary reflector and homogenising lens. Protective cover to reduce scattered light and prevent you from seeing into the ceiling cavity. Plastic darklight reflector without flange and a high-gloss aluminium-plated finish and 30° shielding angle. Secondary cable with adapter for pre-installing the operating device. Powered by strain-relieved terminal. Accessories must be ordered separately (see accessories).
Three Technologies – One Shape
The name TriTec refers to the three technologies: Downlight, spotlights and Lens wallwasher. These three technologies can be used to create customised lighting concepts while keeping the overall look of the ceiling consistent.
Darklight
Glare-free Light without the disruptive glow of the luminaire body.
Best Light to satisfy the most discerning demands
TriTec is in a league of its own when it comes to colour consistency. TriTec boasts a first-rate colour consistency with a range extending to the initial two-step MacAdam. This means that multiple beams of light can be projected onto a white wall without any differences in colour temperature. This guarantees that the colour of the illuminated surface is rendered consistently. The high colour rendering of up to CRI ≥95 gives colours a natural, full appearance. In addition to this, the red tones that are difficult to produce with traditional LEDs are superbly rendered by TriTec (R9 ≥85 at 3000K, R9 ≥75 at 4000K).
Technology
An impressive design means TriTec offers the perfect lighting solution to satisfy the most stringent requirements.
TriTec installation ring round with ceiling trim
As a replacement for the supplied recessed ring of the “round with ceiling trim” assembly type. RAL 9016 white plastic. Including splay spring fixture for installation in ceilings measuring up to 28 mm thick.
SHOWTriTec spring pair for recessed ring
A pair of springs for subsequent assembly to increase the contact pressure of the ring on the ceiling.
SHOWMounting ring with protective glass IP54, expanding rings and edge flange RAL9016
Ceiling cut-out 95mm Maximum ceiling thickness 28mm Only approved for use inside
SHOWFront plate to HaloX 180 with cutout 95mm, max. depth 125mm
Suitable for HaloX 180 installation housing in combination with mounting ring round with trim. Ceiling cutout 95mm for max. installation depth of 125mm
SHOWConcrete installation housing HaloX 180 with tunnel 190
Kaiser HaloX 180 concrete installation housing with tunnel 190
SHOWFlame box Kaiser 9435-03
Flame box FlamoX Kaiser 9435-03 Length: 320mm Width: 270mm Heigth: 150mm
SHOW