- Overview
- / TriTec S ETA
- /with ceiling trim
TriTec S ETA Spotlight
with ceiling trim
Installation depth 67.5mm
Including installation ring with expanding springs
Edge flange 8mm RAL9016
P2200 12026.B |
|
P2200 12026.B / Datasheet | P2200 12026.B / LDT file | P2200 12026.B / LVK image | P2200 12026.B / Dimension drawing | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
P2200 12036.B |
|
P2200 12036.B / Datasheet | P2200 12036.B / LDT file | P2200 12036.B / LVK image | P2200 12036.B / Dimension drawing | ||||||
P2200 12046.B |
|
P2200 12046.B / Datasheet | P2200 12046.B / LDT file | P2200 12046.B / LVK image | P2200 12046.B / Dimension drawing |
P2200 13026.B |
|
P2200 13026.B / Datasheet | P2200 13026.B / LDT file | P2200 13026.B / LVK image | P2200 13026.B / Dimension drawing | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
P2200 13036.B |
|
P2200 13036.B / Datasheet | P2200 13036.B / LDT file | P2200 13036.B / LVK image | P2200 13036.B / Dimension drawing | ||||||
P2200 13046.B |
|
P2200 13046.B / Datasheet | P2200 13046.B / LDT file | P2200 13046.B / LVK image | P2200 13046.B / Dimension drawing |
P2200 14026.B |
|
P2200 14026.B / Datasheet | P2200 14026.B / LDT file | P2200 14026.B / LVK image | P2200 14026.B / Dimension drawing | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
P2200 14036.B |
|
P2200 14036.B / Datasheet | P2200 14036.B / LDT file | P2200 14036.B / LVK image | P2200 14036.B / Dimension drawing | ||||||
P2200 14046.B |
|
P2200 14046.B / Datasheet | P2200 14046.B / LDT file | P2200 14046.B / LVK image | P2200 14046.B / Dimension drawing |
Spotlight
Round recessed spotlight with 25° pivotable light output thanks to a guide mechanism.
Heat sink made from die-cast aluminium, powder-coated black.
LED (COB) with a high level of colour consistency (2 SDCM initial) and high
colour rendering (CRI ≥ 95).
PMMA collimator: light direction and LED contact protection. Darklight anti-dazzle cone made from plastic, with a high-gloss (vaporised) aluminium finish and a colourless scratch-resistant protective coating. DALI2 operating device with plug-in connection (installed without tools), secondary circuit.
Driver is not capable of TouchDim control.
Ceiling cut-out:
In combination with installation ring featuring expanding springs
P0000 00001.B
Cut-out: 67 mm
Installation space in suspended ceilings:
ETA version: 12 dm3
FORTIS version: 15 dm3
Installation type:
Incl. installation ring with expanding springs
Edge flange: 8 mm, RAL9016
Light effect - Wallwasher
Light effect - directional Spotlight
Light effect - Downlight
The three technologies – downlight, directional spotlight and wallwasher – favour a perception-driven approach to light concepts based on “light for seeing” and “light for looking” and in the most consistent design idiom possible.
Darklight
A special coating ensures that the anti-dazzle cone does not scatter light itself and that the light only shines on the desired area in the room. This creates a 100% darklight effect.
The best technology in the smallest form
An impressive design means TriTec S offers the perfect light solution for the most stringent requirements. A specifically developed die-cast aluminium heat sink ensures optimum LED cooling while keeping the installation depth to a minimum.
Mounting ring with expanding rings and edge flange 8 mm RAL9016
Suitable for front part Z00 0030 or suspended ceilings Ceiling cut-out 68 mm Maximum ceiling thickness 15 mm
SHOWMounting ring with protective glass IP54, expanding rings and edge flange 8 mm RAL9016
Suitable for front part Z00 0030 or suspended ceilings Ceiling cut-out 68mm Maximum ceiling thickness 15mm Only approved for use inside
SHOWConcrete installation housing HaloX 100 with tunnel 190
Kaiser HaloX 100 concrete installation housing with tunnel 190
SHOWFront part to HaloX 100 cut-out 68mm
Suitable for installation housing Z00 0029 in combination with installation ring with edge flange 8mm
SHOW