HiLight Surface-mounted tunable white
Acrylic glass block
2700K - 6500K
Downlight 2700K optional
N11 8836.C |
|
N11 8836.C / Datasheet | N11 8836.C / LDT file | N11 8836.C / LVK image | N11 8836.C / Dimension drawing | |||||
---|---|---|---|---|---|---|---|---|---|---|
N11 8856.C |
|
N11 8856.C / Datasheet | N11 8856.C / LDT file | N11 8856.C / LVK image | N11 8856.C / Dimension drawing |
N21 8836.C |
|
N21 8836.C / Datasheet | N21 8836.C / LDT file | N21 8836.C / LVK image | N21 8836.C / Dimension drawing | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
N21 8856.C |
|
N21 8856.C / Datasheet | N21 8856.C / LDT file | N21 8856.C / LVK image | N21 8856.C / Dimension drawing |
Surface-mounted tunable white
Round luminaire body with or without downlight, in the installation versions: surface-mounted or recessed ceiling installation with continuous edge made of aluminium.
One-part outer housing with sharp-edged closing edge, aluminium ground, chemically matted and transparently anodised, can be installed on the ceiling fitting without any need for tools. Finish in the variants: pane of acrylic glass, acrylic glass block or conical microstructured prism (CDP) for applications suitable for computer screens in compliance with DIN EN 12464-1 (in the case of the low-output setting without a downlight).
Ceiling fitting made of aluminium, powder-coated in white (RAL 9016) with two openings for feed-through wiring. Pre-installed DALI DT8 operating device incl. plug-in connector for printed circuit board connection. Plug-in terminal and strain relief on the primary side. Internal wiring halogen-free.
Replaceable LED circuit board with plug-in connector. CRI ≥ 80 (CRI ≥ 90 on request) SDCM initial. Colour temperature 2700K – 6500K. Optional downlight 2700K CRI ≥ 95 at 2 SDCM.
Physical light through an acrylic glass block with total reflection
The acrylic glass block finish makes the light visible in an incomparable way. A special coat of varnish on the underside of the block ensures soft and homogeneous light distribution. The total reflection on the inside of the finish hides the LED circuit board from view, giving the impression that the block is floating in the room. In the variant with downlight, the cone-shaped recess provides a playful accent too.
Elegant materials and precise production
HiLight cuts an impressive figure with precious materials and high-precision craftsmanship. The outer ring made of anodised aluminium is pressed seamlessly from one piece and finished by hand by adding a ground texture. The ring is then joined with the finish to form a unit as part of a special process.
Pleasant luminance or maximum lumen output
HiLight offers a choice of two different luminous intensities. The standard version is characterised by a pleasant luminance on the finish and, in combination with the conical microstructured prism (CDP), enables applications suitable for computer screens according to DIN EN12464-1.
In the high-output version, the luminous flux is increased by approx. 46%.
LED-Downlight – a warm ray of sunlight from the centre of the luminaire
The design option with an additional downlight offers the option of setting additional lighting accents in the room as well as the soft basic lighting. The downlight’s 2700K warm light colour gives the impression of a warm ray of sunlight, which provides additional brilliance on the illuminated surface. This effect is further enhanced in combination with 4000K neutral white basic lighting.
Tunable white – atmospheric light due to a shift in colour temperature
With the tunable white version, the colour temperature can be controlled individually from 2700K to 6500K using DALI DT8 commands. As a result, HiLight can also be used to create application-specific lighting concepts that focus on people’s wellbeing.
Mounting instructions |
NM01 HiLight Gen C LED Manual
NM02 HiLight Gen C Pendel |
---|---|
Brochures |
HiLight Broschüre DE
HiLight Brochure EN |
CE – Conformity |
CE – Declaration of Conformity
|
HiLight Pendant tube for surface-mounted luminaire
Ceiling canopy round sharp-edged, 119x32mm aluminium anodised. Pendant tube Ø 34 mm, aluminium profile anodised. Length 100-1820mm.
SHOWHiLight Suspension cable kit
3x cable holder for screwing into luminaire insert. Steel cables for fixture to the raw ceiling, allowing for height adjustment of the luminaire and reducing load on suspended ceilings.
SHOW