ECO B Luminaire for 2 workplaces
Design CH with connector type T12
· Stand tube asymmetrical to luminaire
· U-shaped stand base
· 2x direct and 2x indirect lighting
L22 2515.C | H=1870mm |
|
Aluminium, anodized, matte standpipe | L22 2515.C / Datasheet | L22 2515.C / LDT file | L22 2515.C / LVK image | L22 2515.C / Dimension drawing | Mingergie | |||
---|---|---|---|---|---|---|---|---|---|---|---|
L22 2615.C | H=1870mm |
|
Aluminium, anodized, matte standpipe with a button | L22 2615.C / Datasheet | L22 2615.C / LDT file | L22 2615.C / LVK image | L22 2615.C / Dimension drawing | Mingergie | |||
L22 6515.C | H=2035mm |
|
Aluminium, anodized, matte standpipe | L22 6515.C / Datasheet | L22 6515.C / LDT file | L22 6515.C / LVK image | L22 6515.C / Dimension drawing | Mingergie | |||
L22 6615.C | H=2035mm |
|
Aluminium, anodized, matte standpipe with a button | L22 6615.C / Datasheet | L22 6615.C / LDT file | L22 6615.C / LVK image | L22 6615.C / Dimension drawing | Mingergie |
Luminaire for 2 workplaces
Lamp head with incline levelling and aluminium vertical tube measuring 34mm in diameter, chemically
matted and transparently anodised. Form-locked LDP inlays with diffusing film for high glare suppression and homogeneous light distribution on the finish. Protection of the indirect light LED panels using a transparent and UV-stable PMMA cover. Halogen-free internal wiring. Stand base made of silver steel, powder-coated with 6 base pads. Supply line black, length = 2700mm with a lamp height of 2035 mm, or 2850mm with a lamp height of 1870 mm. Cable outlet laterally above the base plate. Dimming range from 100% to approx. 0.1%. Flicker-free and silent analogue dimming in a range from 100% to 5%. Visually unnoticeable PWM dimming from 5% at approx. 1500Hz; can also be deactivated upon request. Presence-dependent Sensonic EDR daylight control with asynchronous direct / indirect light regulation.
Sensonic EDR
1 LED switch for light control. 1 control knob for the shut-off time (2–30min.) on the top; can be used as a switch for the area test (presence detector alignment) at the same time. Adjustable presence detector. Ambient light-dependent, asynchronous light regulation with up to 35% energy savings compared to synchronous light regulation. Default setting Auto On / Auto Off. On / Auto Off can be manually adjusted for additional energy savings. LILO (Limited Indirect Light Output) mode to reduce the indirect light to 75% (7750lm) can be adjusted at a 10390lm lamp luminous flux and a reduced lamp connected wattage of 67W.
Optional Sensonic SPREAD upgrade kit
Can be classified into up to four lamp groups, which communicate wirelessly and thus ensure a pleasant lighting situation with a fluid transition from bright to dark. Direct control via the iPhone app. (See the operating instructions for a detailed description.)
Impressive Efficiency
ECO B is setting new standards for energy-efficient and ergonomic lighting solutions in the office. Due to the impressive efficiency up to 157lm/W (Luminaire for 2 and 4 workplaces) and 141lm/W (Luminaire for 1 workplace) when combined with the application-optimised SENSONIC EDR light control system, resources are conserved and ergonomic workplace lighting is guaranteed at the same time.
SENSONIC Control
the ECO B floor lamp is equipped with the presence and ambient light-dependent SENSONIC control system, which provides optimum light conditions in the room in a fully automatic manner. The required luminous intensity is continuously adjusted to the available ambient light.
EDR – Up to 35% extra efficiency increase due to asynchronous Regulation
Due to this asynchronous light regulation, the spatial effect is supported at the same time, achieving up to 35% better efficiency than a light control system with synchronous regulation.
Outstanding Technology for maximum Ergonomics
The ECO B series of floor lamps was consistently designed to suit the needs of users. The light is regulated across the entire dimming range from 100% to 0.1% without any flickering, whereby the individual dimming steps are unnoticeable.
Operating instructions |
alteme LM10 ECO LED settings
|
---|---|
Mounting instructions |
LM09 ECO Gen C Manual
LM13 ECO Gen C SPREAD alteme WH01 ESD Warnings |
Brochures |
ECO B Broschüre DE
ECO B Brochure EN |
CE – Conformity |
CE Declaration of Conformity ECO B Stehleuchten 1er 2er 4er Gen. C
|
Universal table adapter
Transparent-anodised aluminium, clamping area 0-75 mm, matching verticle tube available on request.
SHOWTable adapter for USM adaptation point
Black anodised, matching verticle tube available on request
SHOWUSM Table leg adapter
High-gloss polished stainless steel, easy installation and removal thanks to simple clamping mechanism for USM table leg, matching verticle tube available on request.
SHOW