- Overview
- / TriTec ETA
- /Round trimless
TriTec ETA Lens wallwasher
Round trimless
Primary lens made of optical raw glass for focusing of light on the secondary lens. Secondary diverging lense for light guidance trough refraction and total reflection made of optical raw glass. Recessed ring must be ordered separately (see accessories).
P3100 32006.D |
|
P3100 32006.D / Datasheet | P3100 32006.D / LDT file | P3100 32006.D / LVK image | P3100 32006.D / Dimension drawing |
---|
P3100 32001.D |
|
P3100 32001.D / Datasheet | P3100 32001.D / LDT file | P3100 32001.D / LVK image | P3100 32001.D / Dimension drawing |
---|
P3100 33006.D |
|
P3100 33006.D / Datasheet | P3100 33006.D / LDT file | P3100 33006.D / LVK image | P3100 33006.D / Dimension drawing |
---|
P3100 33001.D |
|
P3100 33001.D / Datasheet | P3100 33001.D / LDT file | P3100 33001.D / LVK image | P3100 33001.D / Dimension drawing |
---|
P3100 34006.D |
|
P3100 34006.D / Datasheet | P3100 34006.D / LDT file | P3100 34006.D / LVK image | P3100 34006.D / Dimension drawing |
---|
P3100 34001.D |
|
P3100 34001.D / Datasheet | P3100 34001.D / LDT file | P3100 34001.D / LVK image | P3100 34001.D / Dimension drawing |
---|
Lens wallwasher
LED (COB) light engine with touch protection and premium-quality colour rendering. Cooling via a die-cast aluminium heat sink that is powder-coated in black textured paint. Case with primary reflector and homogenising lens. Protective cover to reduce scattered light and prevent you from seeing into the ceiling cavity. Plastic darklight reflector without flange and a high-gloss aluminium-plated finish and 30° shielding angle. Secondary cable with adapter for pre-installing the operating device. Powered by strain-relieved terminal. Accessories must be ordered separately (see accessories).
Three Technologies – One Shape – Optimum Reduction in glare
Light is only visible to us when it hits our retina. This is why we only see light that comes directly from a shining light source or an illuminated object. This light is scattered and enters our eye
Technology
An impressive design means TriTec offers the perfect lighting solution to satisfy the most stringent requirements.
Best Light to satisfy the most discerning demands
TriTec is in a league of its own when it comes to colour consistency. TriTec boasts a first-rate colour consistency with a range extending to the initial two-step MacAdam. This means that multiple beams of light can be projected onto a white wall without any differences in colour temperature.
Recessed installation ring for timber ceilings
Stainless steel with partially edged outside, aligned according to etiquette; for gluing into timber ceiling. Height 30 mm. Ceiling cutout 89mm
SHOWPlasterboard round trimless
Equipped with integrated recessed ring/frame, protruding by 1 mm, slightly cone-shaped, smoothed. Thickness of plasterboard: 12.5 mm. Ceiling cutout 95mm
SHOWMounting ring with protective glass IP54, expanding rings and edge flange RAL9016
Ceiling cut-out 95mm Maximum ceiling thickness 28mm Only approved for use inside
SHOWTriTec cover alu anodised
Cover made of anodised aluminum with abrasive structure. Including splay spring fixture for installation in ceilings measuring up to 28mm thick. Ceiling cutout DA=95mm per luminaire. Distance for ceiling cutout 130mm per luminaire middle section.
SHOWPlaster ring D86mm adjustable for mounting in suspended ceilings
For trimless mounting in suspended ceilings. Ceiling cutout 95mm, ceiling thickness incl. finery 8-26mm.
SHOWFront plate to HaloX 180 for exposed concrete
Suitable for HaloX 180 installation housing. For trimless mounting. Diameter 86mm
SHOWConcrete installation housing HaloX 180 with tunnel 190
Kaiser HaloX 180 concrete installation housing with tunnel 190
SHOWRecessed ring round trimless
For installation in plasterboard ceilings. Ring with circumferential, perforated edge and plaster edge bead. Plastic, white, RAL9016. Including splay spring fixture for installation in ceilings of up to 28 mm in thickness. Ceiling cutout 95mm. Defined plaster thickness 3mm.
SHOWPlaster ring D86mm adjustable
Plaster ring D86mm adjustable for front plate Z00 0017 / Z00 0046
SHOWPlaster ring height-adjustable D86 for underside of ceiling
Ceilings underside mounting Plaster thickness 9-25mm for Downlight and Wallwaher Plaster thickness 9-15mm for orientable Spotlight
SHOWFront plate to HaloX180, max. depth 100mm
Front plate HaloX180 for Plaster ring D86 Z00 0015 for max. installation depth of 100mm
SHOWFront plate to HaloX180, max. depth 125mm
Front plate HaloX180 for Plaster ring D86 Z00 0015 for max. installation depth of 125mm
SHOW